Location
NorTech Industrial
PO Box 31
Greenwich, NY 12834
518-692-3370
Fax-692-8357
800-296-8921

NEW AIR FILTRATION PRODUCTS

SPC Small Portable Cartridge Collector

  • SPC Small Portable Cartridge Collector1000 Nominal CFM @ 5.5 inches of static pressure
  • 115 Volt, single phase 1.5 HP TEFC motor with 8 foot cord and switch
  • Direct drive backward inclined airfoil non-overloading fan
  • 177 square feet of filter area providing filter efficiency of 99% at 0.5 microns
  • 80/20 Polyester Blend flame retardant HEPA-like cartridge filter
  • Internal baffle protecting cartridge filter
  • Manual push button pulse-jet filter cleaning system
  • Easy tool-less filter change-out
  • Mini-helic filter change-out gauge
  • Dust collection drawer
  • 6-inch by 10-foot externally supported extraction arm
  • 10-inch rear wheels and 5 inch front swivel wheels
  • 11- and 14-guage heavy duty metal construction
  • Kelly Green industrialized textured powder coat finish
More info about Small Portable Cartridge Collectors

Small Portable Cartridge DownDraft Bench SPCB-1000

  • Small Portable Cartridge DownDraft Bench SPCB-1000Direct drive forward curved blower with a 1.5HP TEFC motor delivering 1000 CFM
  • 115/220 volt single phase with power cord and plug
  • Pull-out dust drawer with a holding capacity of 0.9 cubic feet
  • Bubble gasket seal on blower and filter access doors
  • 177 square feet of filter area providing HEPA-like filter efficiency of 99% at 0.5 microns
  • 80/20 Polyester Blend flame-retardent HEPA-like cartridge filter
  • Internal baffle protecting cartridge filter
  • Manual push button pulse-jet filter cleaning system
  • Easy tool-less filter change-out
  • Mini-helic filter change-out gauge
  • 10-inch rear wheels and 5 inch front swivel wheels
  • 11- and 14-guage heavy duty metal construction
  • Kelly Green industrialized textured powder coat finish
  • Built-in sound attenuator
  • Table Top is of aluminum construction with 3/4” Holes
  • Wrap Around body with swing-open doors to enclose part on table
  • Table top velocity is 250 FPM
More info about SBC Downdraft Benches

Cyclone Dust Collectors CYC Series

Cyclone Dust Collectors CYC SeriesThe CYC Cyclone Separators are among the most efficient and cost-effective dust collectors available. CYC Cyclones are offered in capacities from 800 CFM to 13,000 CFM and efficiently remove moderate- to large-sized particles from the airstream. Fans are self-cleaning, material-handling, radial blades designed to deliver peak airflow while the low horsepower conserves energy.

The centrifugal action of the Cyclone, created by rapid rotation of the high-velocity air stream, forcibly precipitates the dust out through the bottom of the Cyclone and into a collection drum or hopper for the specific application. Standard dust storage capacities vary from 7.5 cu. feet to 40 cu. feet, with special hopper configurations available. All models can be housed indoors or outdoors.

More info about Cyclone Dust Collectors

Environmental Booth Collectors EB Series

  • Environmental Booth Collectors EB SeriesFreestanding units can be installed individually or in conjunction with a booth.
  • Various sized, self-supporting booth options are available to give workers ample working space.
  • Modular, Compact Design permits proper sizing for each application.
  • Front access dust drawers allow for ease of maintenance.
  • Filters are easily accessed to facilitate fast replacement.
  • Removes airborne dust from multiple sources.
  • Reverse jet pulse design optimizes filter cleaning and extends filter life.
  • Requires no duct work, reducing installation cost.
  • Application-specific filter media maximizes efficiency.
  • Recirculates clean air , eliminating the need for expensive make-up air.
  • Relocation due to changes in plant layout is simple and cost effective.
More info about Environmental Booth Collectors

Overhead Weld Cell Collector (OWC Series)

  • Overhead Weld Cell CollectorCompact Design
  • Ideal for Weld Fume
  • Removes airborne fume and dust from robotic welding applications.
  • Reverse jet pulse design optimizes filter cleaning, extends filter life, and reduces maintenance.
  • Application-specific filter media maximizes efficiency.
  • Recirculates clean air, eliminating the need for expensive make-up air.
  • Relocation of Autovent units due to changes in plant layout is simple and cost effective.
  • Custom Ductwork Design and Fabrication is available.
  • Dust Drawer and Access Door facilitates ease of maintenance.
More info about Overhead Weld Cell Collectors

Powered DownDraft Bench (PB) Series

  • Powered DownDraft BenchCaptures dust, smoke and fumes from multiple tabletop applications.
  • High Capture Velocity, 250 fpm.
  • Low Air to Cloth Ratios for longer filter life.
  • Reverse jet pulse design optimizes filter cleaning and extends filter life.
  • Requires no duct work, reducing installation cost.
  • Application-specific filter media maximizes efficiency.
  • Recirculates clean air, eliminating the need for expensive make-up air.
  • Helps Maintain a Clean Air Work Environment.
  • Hands-Free Capture promotes Safety and Efficiency.
  • Vertical Filter Arrangement for Superior Cleaning.
More info about Powered DownDraft Benches

Product Catalog || Contact Us || NorTech Home

Air Filtration: New Products, Mist Collectors, Dust Collectors, Smoke Collectors
Fume Collectors, Ambient Filters, Replacement Filters

NorTech Industrial
PO Box 31, Greenwich, NY 12834
518-692-3370 | Fax-692-8357
Toll Free 800-296-8921

Site Design & Promotion by Nolee-O Web Design